Vapman Vaporizer – Tips and Tricks

2
Every consumer product has its own unique use and properties. A vaporizer is a product of commitment and craftsmanship, in that it works to give you the vapor experience that you desire. The Vapman is an excellent and unique vaporizer that comes to us from Europe. When experienced users use a vaporizer more and more over time, they often find out what works best for them.  This can include different tips and tricks that normal users may not expect. We already know about the benefits of vaporizing, so let’s now look at some tips and tricks that will make your experience even better.

Vapman Tips and Tricks

Vapman Vaporizer Tips and Tricks

The Tips

Let’s take a look at some of the ways that you can use the Vapman right. To use the Vapman, you open the vapman, put your botanical in the gold plated heating chamber with the funnel filter, replace the cap and heat the bottom with the torch lighter. You can then take your draws.  Now let’s look at a more detailed way to improve your base experience.
Vapman Vaporizer Tip: The Flame

1. The Flame

For efficient heat, you want to use the tip of a light blue flame produced by the torch lighter on the apex of the heating chamber. You don’t want to use a regular lighter. You need to use a torch lighter. Time to heat all depends on the flame produced by your lighter. The bigger the flame, the less you need to heat. Time can vary between 2 and 10 seconds depending on the size of the flame. If you heat up the Vapman too high or extreme temperatures, you could damage the chamber and cause the gold to flake off. The Vapman still works like this; it just doesn’t look as nice.

Vapman Vaporizer Tip: Grinding

2. The Grind

With the Vapman, you don’t need a lot of botanical to produce vapor.  You want to make sure that you have used the right grinder when preparing your botanical. It is all about maximizing your botanicals surface area and its exposure to the heat. Continue with a steady draw. You can experiment to see what works best for you and produces desirable vapor.

Vapman Vaporizer Tip: Finishing Off

3. The End

You can usually tell when your session is finished when your Vapman is producing no vapor and your botanical material has turned brown. You can easily remove residue after your session while the chamber is still warm.  It should make removing residue easier. Be careful that you don’t burn yourself. You can also remove your botanical with a toothpick or safety pin. You can clean the mouthpiece with hot water and a pipe cleaner.  Metal parts can be cleaned with isopropyl alcohol. If the strainer portion gets clogged, you can clear it out with a toothpick or safety tin.

The Tricks

Now let’s take a look at some tricks that you can use outside of your normal use to enhance your vaporizing experience.
Vapman Vaporizer Trick: Vapor Control

1. Vapor Control

When first heating up the chamber for your session, you can try to heat for small two second intervals to distribute the heat evenly. It gets easier as you warm it up more and more that you use it.  Next, you may be wondering what those three holes around the side of the mouthpiece are for. You can use these to thicken your vapor. You do this by covering one, two or all three of these holes. The more coverage, the thicker the vapor you get when you take your draws. You also want to be careful when heating the Vapman in that you just apply the heat to the metal portion of the base and avoid the wood. This will reduce the chance of inadvertently burning your fingers.
Vapman Vaporizer Trick: Tighten Up

2. Tighten Up

The Vapman can slightly loosen over time. To get it back into fighting form, you can use a small eyeglass screwdriver to tighten up the screws on the bottom of the unit. If you lose your loading funnel, you can always just be very careful and load a small amount at a time.

There you have it, new insights into how you can get the most out of your Vapman.  You will be able to find what works for you the more and more you experience your vaporizer. Don’t be afraid to experiment to find out what is best for you.  If you want to pick up the Vapman Complete, Vapman Basic, accessories and cleaning supplies, check out TorontoVaporizer.ca. Not sure what temperatures you should be using when vaporizing? Check out our Vaporizing Temperatures blog post for our recommendations. For a full review of the Vapman vaporizer, just click the banner below:

Vapman Vaporizer Review
Thankyou for reading today’s Vapman Vaporizer – Tips and Tricks post. If you have any questions, comments or even some of your own suggestions for tips and tricks, leave them down below for your fellow connoisseurs. Don’t forget to follow us on FacebookTwitter or Google+ for contests, sales alerts and other fun stuff!
Hope to see you soon, and as always… keep vapin’! ;)

About Author

Milad is a gadget collector and master crafter extraordinaire. He loves taking things apart, marvel comics and 'Iron Man.'

2 Comments

Leave your comment! You can do so anonymously :)

All opinions are that of the writer and in no shape or form to be misinterpreted as fact.
Copyright © 2016 TorontoVaporizer.
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[i]
[j]
[j]
[i]
[i]
[j]
[j]