Review: <\/span>Dynavap<\/span> M (2018 version)<\/span><\/b><\/span><\/h2>\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-main.jpg\")
<\/p>\n
\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-how-it-works-283x300.jpg\")
<\/h3>\nHow it Works<\/h3>\n
The Dynavap M has a slight learning curve. You remove the cap, fill the chamber with around 0.05 grams of herb (either large chunks or ground), replace the cap and heat it up with any butane torch! Wait until the tip clicks, and then inhale!<\/p>\n
Use the carb hole to your advantage if trying to clear the chamber, and modulating between covering it and letting it flow freely changes the traits of the vapor you inhale.<\/p>\n
With a water pipe, the standard mouthpiece will fit any 10mm joint, and it\u2019s as simple as heating the unit and fitting it over the 10mm opening. Simple to use and effective!<\/p>\n
There are no differences in using the 2018 model and previous models.<\/p>\n
![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-main2.jpg\")
<\/div><\/div>
\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-temperature-flexibility-283x300.jpg\")
<\/p>\n
Temperature Flexibility<\/h3>\n
Being a butane powered vaporizer, the temperature you set it at is entirely up to you and your technique. Heat-up time is rapid, depending on the type of lighter you use. A multi-jet lighter will heat up the Dynavap much quicker than a single one. Where you heat the Dynavap also changes \u2013 heating on the side and slowly rotating it offers a different experience than heating just the tip.<\/p>\n
When the tip clicks, then it\u2019s time to inhale! You can continue heating for a couple seconds after the initial click to get a higher temperature and thus a heavier hit, though it\u2019s important to be careful as too much heat will combust your herb!<\/p>\n
All things considered, as it\u2019s a user dependent heating source, you\u2019re given full temperature flexibility \u2013 just no way of precisely setting it. Until you master your technique, that is! There are no differences between previous models and the 2018 model in temperature flexibility. <\/div><\/div>
\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-vapor-quality-283x300.jpg\")
<\/h3>\nVapor Quality<\/h3>\n
For best results, we recommend drying your herbs with a\u00a0de-humidor<\/a>. Once you get the hang of the heating and technique, you can get some seriously dense clouds with great flavor! The vapor is surprisingly cool and with water pipe compatibility, you get very tasty, on-demand draws.<\/p>\nThe heating could be considered a mix of conduction and convection as the herb does physically touch the walls of the chamber, though when you take a draw, the air is heated enough to give some elements of convection.<\/p>\n
With a water pipe, the quality just gets even better! Smoother and more flavorful hits make this tiny vaporizer extremely versatile too. The standard mouthpiece fits in any 10mm female joint, though 10mm to 14 or 18mm adapters can be used for further compatibility.<\/p>\n
Between the 2018 model and previous iterations, there is a slightly cooler vapor that comes out and draw resistance is slightly reduced too! Though not massive improvement, it\u2019s a small and welcome change, especially for only a $5 difference between the 2017 and 2018 version.<\/div><\/div><\/span>\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-manufacturing-quality-283x300.jpg\")
<\/h3>\nManufacturing Quality<\/h3>\n
Being made entirely of stainless steel, the build quality feels fantastic! Durable, weighty, tiny, and precise are some words I\u2019d use to describe it. Each piece is very well machined, and as it doesn\u2019t use batteries or any electronics, it\u2019s practically impossible to break.<\/p>\n
There are some really fantastic accessories available too like the Dynastash, Carbon Fibre and Titanium stems, wood mouthpieces and more!<\/p>\n
For what you pay, you\u2019re given a really well machined little unit that\u2019ll stand the test of time. No plastic, no breakables, just a proven design.<\/p>\n
Some subtle differences have been made for the 2018 Dynavap M. The fins on the condenser are a bit smaller and more effective, the carb hole has been made a little easier to feel for, some knurling is introduced onto the midsection to make rotating it easier, and the logo is a little more discreet. Overall, not much changed, but again, they\u2019re welcome changes!<\/p>\n
![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-main4.jpg\")
<\/p>\n
<\/div><\/div><\/span>\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-portability-283x300.jpg\")
<\/h3>\nPortability<\/h3>\n
Probably one of the smallest dry herb vaporizers to date, the Dynavap M is uber portable and can fit practically anywhere. Of course, you\u2019ll need to carry a butane lighter, though, in a pinch, any ordinary gas station lighter will work just fine.<\/p>\n
It\u2019s much preferred to use a decent butane lighter though as it\u2019ll take longer with a normal lighter and you\u2019ll have to clean the tip from black soot occasionally.\u00a0There are no differences in portability with the 2018 model and previous ones. <\/div><\/div>
\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-ease-of-use-283x300.jpg\")
<\/p>\n
Ease of Use<\/h3>\n
After you\u2019ve had a few sessions with the Dynavap, you\u2019ll have understood it entirely. Though a complete beginner will need a little bit of coaching, overall it\u2019s pretty easy to use. Heat until it clicks, cover the carb hole, and inhale. Changing up your lighter and draw technique lets you fine-tune your experience as such.<\/p>\n
Cleaning is relatively easy. Some isopropyl alcohol makes quick work of any built-up residue, and the stainless steel screen swaps out with ease.<\/p>\n
For the 2018 and previous model years, there are no differences. <\/div><\/div>
\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edtiton-discreetness-283x300.jpg\")
<\/h3>\nDiscreetness<\/h3>\n
Since it\u2019s so tiny and completely on-demand, this is a great choice for a discreet vaporizer. It\u2019ll fit entirely hidden in your hand, you can have a session in less than 30 seconds and to some, it may look like a tiny e-cigarette.<\/p>\n
There are no differences in the discreetness category for the 2018 and previous models.<\/div><\/div>\n![\"Dynavap](\"https:\/\/torontovaporizer.ca\/blog\/wp-content\/uploads\/2018\/04\/dynavap-m-2018-edition-overall-experience-283x300.jpg\")
Overall Experience<\/h3>\n
A great starter vaporizer if you don\u2019t mind butane, the Dynavap M 2018 is a nifty if not niche little device.<\/p>\n
If you\u2019re looking for something bite-sized which instead uses a battery as a power source at a similar price point, check out the Utillian 420<\/a>.<\/p>\nIf you have questions about our Dynavap M Vaporizer review or just want to let us know what you think, feel free to drop us a comment below!\u00a0Thanks for reading and as always, keep vapin\u2019!<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"
Though we\u2019ve already covered Dynavaps TiWoody and NonaVong, we figured we\u2019d give the standard Dynavap M a review. A crowd favorite, Dynavap has made some minor adjustments and tweaks to the original for 2018. We\u2019ll be going over the Dynvap M and how this tiny vaporizer performs, and any differences that the 2018 model has<\/p>\n
<\/p>\n<\/h3>\nHow it Works<\/h3>\n
The Dynavap M has a slight learning curve. You remove the cap, fill the chamber with around 0.05 grams of herb (either large chunks or ground), replace the cap and heat it up with any butane torch! Wait until the tip clicks, and then inhale!<\/p>\n
Use the carb hole to your advantage if trying to clear the chamber, and modulating between covering it and letting it flow freely changes the traits of the vapor you inhale.<\/p>\n
With a water pipe, the standard mouthpiece will fit any 10mm joint, and it\u2019s as simple as heating the unit and fitting it over the 10mm opening. Simple to use and effective!<\/p>\n
There are no differences in using the 2018 model and previous models.<\/p>\n
<\/div><\/div>
<\/p>\n
Temperature Flexibility<\/h3>\n
Being a butane powered vaporizer, the temperature you set it at is entirely up to you and your technique. Heat-up time is rapid, depending on the type of lighter you use. A multi-jet lighter will heat up the Dynavap much quicker than a single one. Where you heat the Dynavap also changes \u2013 heating on the side and slowly rotating it offers a different experience than heating just the tip.<\/p>\n
When the tip clicks, then it\u2019s time to inhale! You can continue heating for a couple seconds after the initial click to get a higher temperature and thus a heavier hit, though it\u2019s important to be careful as too much heat will combust your herb!<\/p>\n
All things considered, as it\u2019s a user dependent heating source, you\u2019re given full temperature flexibility \u2013 just no way of precisely setting it. Until you master your technique, that is! There are no differences between previous models and the 2018 model in temperature flexibility. <\/div><\/div>
<\/h3>\nVapor Quality<\/h3>\n
For best results, we recommend drying your herbs with a\u00a0de-humidor<\/a>. Once you get the hang of the heating and technique, you can get some seriously dense clouds with great flavor! The vapor is surprisingly cool and with water pipe compatibility, you get very tasty, on-demand draws.<\/p>\n The heating could be considered a mix of conduction and convection as the herb does physically touch the walls of the chamber, though when you take a draw, the air is heated enough to give some elements of convection.<\/p>\n With a water pipe, the quality just gets even better! Smoother and more flavorful hits make this tiny vaporizer extremely versatile too. The standard mouthpiece fits in any 10mm female joint, though 10mm to 14 or 18mm adapters can be used for further compatibility.<\/p>\n Between the 2018 model and previous iterations, there is a slightly cooler vapor that comes out and draw resistance is slightly reduced too! Though not massive improvement, it\u2019s a small and welcome change, especially for only a $5 difference between the 2017 and 2018 version.<\/div><\/div><\/span> Being made entirely of stainless steel, the build quality feels fantastic! Durable, weighty, tiny, and precise are some words I\u2019d use to describe it. Each piece is very well machined, and as it doesn\u2019t use batteries or any electronics, it\u2019s practically impossible to break.<\/p>\n There are some really fantastic accessories available too like the Dynastash, Carbon Fibre and Titanium stems, wood mouthpieces and more!<\/p>\n For what you pay, you\u2019re given a really well machined little unit that\u2019ll stand the test of time. No plastic, no breakables, just a proven design.<\/p>\n Some subtle differences have been made for the 2018 Dynavap M. The fins on the condenser are a bit smaller and more effective, the carb hole has been made a little easier to feel for, some knurling is introduced onto the midsection to make rotating it easier, and the logo is a little more discreet. Overall, not much changed, but again, they\u2019re welcome changes!<\/p>\n <\/div><\/div><\/span> Probably one of the smallest dry herb vaporizers to date, the Dynavap M is uber portable and can fit practically anywhere. Of course, you\u2019ll need to carry a butane lighter, though, in a pinch, any ordinary gas station lighter will work just fine.<\/p>\n It\u2019s much preferred to use a decent butane lighter though as it\u2019ll take longer with a normal lighter and you\u2019ll have to clean the tip from black soot occasionally.\u00a0There are no differences in portability with the 2018 model and previous ones. <\/div><\/div> After you\u2019ve had a few sessions with the Dynavap, you\u2019ll have understood it entirely. Though a complete beginner will need a little bit of coaching, overall it\u2019s pretty easy to use. Heat until it clicks, cover the carb hole, and inhale. Changing up your lighter and draw technique lets you fine-tune your experience as such.<\/p>\n Cleaning is relatively easy. Some isopropyl alcohol makes quick work of any built-up residue, and the stainless steel screen swaps out with ease.<\/p>\n For the 2018 and previous model years, there are no differences. <\/div><\/div> Since it\u2019s so tiny and completely on-demand, this is a great choice for a discreet vaporizer. It\u2019ll fit entirely hidden in your hand, you can have a session in less than 30 seconds and to some, it may look like a tiny e-cigarette.<\/p>\n There are no differences in the discreetness category for the 2018 and previous models.<\/div><\/div> A great starter vaporizer if you don\u2019t mind butane, the Dynavap M 2018 is a nifty if not niche little device.<\/p>\n If you\u2019re looking for something bite-sized which instead uses a battery as a power source at a similar price point, check out the Utillian 420<\/a>.<\/p>\n If you have questions about our Dynavap M Vaporizer review or just want to let us know what you think, feel free to drop us a comment below!\u00a0Thanks for reading and as always, keep vapin\u2019!<\/div><\/div>\n","protected":false},"excerpt":{"rendered":" Though we\u2019ve already covered Dynavaps TiWoody and NonaVong, we figured we\u2019d give the standard Dynavap M a review. A crowd favorite, Dynavap has made some minor adjustments and tweaks to the original for 2018. We\u2019ll be going over the Dynvap M and how this tiny vaporizer performs, and any differences that the 2018 model has<\/p>\n<\/h3>\nManufacturing Quality<\/h3>\n
<\/p>\n<\/h3>\nPortability<\/h3>\n
<\/p>\nEase of Use<\/h3>\n
<\/h3>\nDiscreetness<\/h3>\n
Overall Experience<\/h3>\n