Available for Pre-Order, expected to ship in January
Le vaporisateur pour herbes séchées Pulsar APX est stylisé et très portatif. Il présente 5 réglages de température prédéterminés ainsi qu'une grande chambre thermique en céramique. Il s'agit d'un design à un bouton garantissant une session de vaporisation sans tracas.
6.3Qualité de la VapeurQualité de la Vapeur
6.6Qualité de la FabricationQualité de la Fabrication
7.3Marge de températureMarge de température
6.5Autonomie de la batterieAutonomie de la batterie
Autonomie de la batterie1 hour
Temps Chauffage40 seconds
Température180C. 190C, 200C, 210C, 220C
Garantie1 year with Manufacturer
MateriauxCeramic Heating Chamber
Caracteristiques PrincipalesSlim Design
5 Pre-Set Temperatures
Let’s have a look at the Pulsar APX Vape. This small one button dry herb vaporizer is the new and improved version of the Pulsar APX Herb. Let’s see if it holds up to the original!
Inside the box you’ll find:
•1x Pulsar APX Vape
•1x USB Charging Cable
•1x Stir Tool
•1x Cleaning Brush
•1x Extra Silicone Mouthpiece Screen
And if you order with us you can also choose to receive a free ZEUS Bolt grinder made of aircraft grade aluminum.
The first thing you’ll want to do with the unit is sterilize it. To do that, press the button on the side 5 times to turn it on. Press and hold the power button to get to the maximum temperature. The APX Vape has a 4-minute auto shut off, so turn it back on and repeat this process three more times to complete the sterilization. This will get rid of any of the manufacturing oils which may have gotten inside the unit as a result of putting it together.
To load your unit, first remove the mouthpiece from the heating chamber. Load your botanical into the chamber using your Zeus scoop.
Once you have completed this, replace the mouthpiece and you are ready to go!
The APX Vape has 5 temperature settings that you can cycle between by pressing and holding the button for a varying amount of time.
356 degrees Fahrenheit is the lowest, then 374, 392, 410 and finally 428 degrees Fahrenheit is the highest temperature.
Once you have selected your desired temperature, let it heat up. The APX Vape will vibrate when it hits temperature.
To wrap this up, I’d like to tell you about some of the key features of the Pulsar APX Vape which make it such a great little device.
The APX Vape has a 30 second heat up time which is great for quick sessions and anyone who wants their vapour and wants it now.
With only one button, the APX Vape is excellent for new users. It is simple to load, charge and clean as well, making it an ideal first vaporizer.
The third is how discreet this unit is. Standing only 4 inches tall, it fits in any pocket, and if you stay on the lower temperature settings, the clouds will be small and discreet.
The APX Vape is a great unit for anyone looking for a discreet, portable dry herb unit that serves all of your stealthy needs.
I’m Alex for TVape TV. We hope you enjoyed this video and found it useful. And for all you connoisseurs out there, keep vapin'!
What’s up guys, this is Alex for TVape TV. Solid choice getting the Pulsar APX Vape! Let’s go over some quick cleaning tips to ensure you get tasty vapor with this unit, every time. First, we’ll go over the materials you’ll need, then we’ll get into cleaning and maintenance.
Before you start cleaning your Pulsar APX Vape, make sure you have:
•The ZEUS Purify cleaning solution; diluted 40% with water
•ZEUS grime sticks
•ZEUS Bristle Pipe Cleaners
The APX Vape is really easy to clean; all you need to do is care for the heating chamber and the mouthpiece.
To clean the heating chamber, take a ZEUS grime stick, snap the top, let the alcohol drain to the bottom and swab the inside. To ensure no alcohol particles are left behind, after letting it sit for a few minutes, turn the unit on, set it to the highest heat setting and let it run through a couple heating cycles.
You can clean the mouthpiece by separating it into three pieces and then soaking them in a jar of your diluted ZEUS Purify Solution, for about half an hour. Then use the ZEUS bristle pipe cleaners to dislodge any remaining particles. Next, rinse and towel dry.
For best care, we recommend that you brush out your heating chamber after each use with a ZEUS Bristle Pipe Cleaner. This’ll help get out any extra particles and prep your APX Vape for your next session. And that’s it!
We hope you enjoy your APX Vape and thanks for watching! If you have any questions, don’t hesitate to reach out to us. Cheers and as always, keep vapin’!
Inclus dans la Boite
Add a review
I find it a pain to clean after each use. The screen becomes clogged very quickly, and while it comes with extra screens it is just an inconvenience I would like to see it remedied. Perhaps the proximity of the screen to the heating chamber is the culprit here. Not sure if this is only true for this model or if it's just the price you pay for using this type of device. Either way, I find it annoying to have to figure in cleaning so often.
It can feel warm to the touch after a few minutes use. Not uncomfortably so but definitely noticeable.
I will in all likelihood upgrade in the coming weeks. For now, this has been a good introduction to vaping. Can't see myself going back to pipes and rolling
Mouth piece needs to be cleaned often to fully enjoy draws but it is easy to clean with isopropol.
A conduction based vape but the element is too close to the chamber where heat transfer burns the herb. The proximity of heat, and the burning, effects the flavour of the vapour and can cause high temps to reach mouth.
Very portable. Easy button use.
There are two things you need to know about this vape though.
1st: The mouthpiece mod. When you unscrew the metal screen holder thing in the mouthpiece to clean it you'll notice that there's two screens in there with a spacer.....just take the top one out. It doesn't let any herb through but it drastically improves flow rate (idk why they even tried to put two in there). Just do this as soon as you open the box. It makes it flow like a PAX :P
2nd: The only real complaint I have is the vapor chamber is really close to the mouthpiece and can get hot if you really push it hard (it does that with or without the mod). There should be an extended mouthpiece or something to help cool it a bit
9/10 would buy again if I lost mine. Just wish I knew about the cool coloured ones before I got a plain black one :P