Pax 3 Device Only Kit
The Pax 3 vaporizer improves upon the success of the Pax 2, offering users Bluetooth connectivity for further customization and the same reliable vapor quality the Pax is known for. The Device Only Kit and comes with the Pax 3, the charging dock, and the maintenance kit.
8.8Vapor QualityVapor Quality
8.6Manufacturing QualityManufacturing Quality
8.3Temperature FlexibilityTemperature Flexibility
7.7Battery LifeBattery Life
Heat time30 seconds
Temperature182C, 193C, 204C, 215C
Warranty2 Years with Manufacturer
VersionsLatest Version: Dec 2016
MaterialsStainless Steel Chamber
Stainless Steel Vapor Path
Key FeaturesBluetooth App
Let’s have a look at the Pax 3 Vaporizer. This unit is the new and improved version of the Pax 2 vaporizer from the California-based manufacturer Pax Labs.
Inside the box you’ll find:
•The Pax 3 Vaporizer
•1 Half-Pack Over Lid
•1 Concentrate canister
•1 Usb cable
•1 charging dock
•1 raised mouthpiece
•1 cleaning brush
•1 set of bristle cleaners
•The Pax 3 packing tool
And if you order with us you can also choose to receive a free ZEUS Bolt grinder made of aircraft grade aluminum.
The first thing you’ll want to do with the unit is sterilize it. To do this, press down on the center of the mouthpiece to access the power button and turn the unit on. Next, press and hold the power button to enter the temperature select menu. Tap the power button until all the flower pedals on the logo illuminate and glow red to signal you are at the highest temperate, which is 215 Celsius. Press and hold the power button to set the temperature and the device will begin to automatically heat up. After a few minutes the device will automatically turn off because it is not sensing any draws. Repeat the process to turn the device back on and perform this process 3 more times to complete the sterilization. This will get rid of any of the manufacturing oils that may have gotten inside the unit as a result of putting it together.
Once you’ve done that, you’re ready to load your unit with freshly ground botanical.
To grind up your botanical we always recommend using the ZEUS bolt grinder. The bolt grinder has been calibrated to grind up your botanical to the perfect consistency for vaporization. That means its fine enough to be properly vaporized inside of your unit, but not so fine that it fly’s through screens.
To load your unit, remove the magnetic chamber lid at the bottom of the device to expose the heating chamber. Using your ZEUS scoop, load freshly ground botanical into the heating chamber and pack it down lightly with the included packing tool. Next cap the chamber with the lid and you are ready to vaporize!
To load your unit with waxes or concentrates, first load the Pax 3 concentrates canister with your choice of wax or concentrates. Next remove the standard heating chamber cap and replace it with the Pax 3 concentrate container. Then set the Pax to its higher temperature and you are ready to enjoy your concentrates!
The Pax 3 vaporizer has 4 temperature settings as indicated by the 4 LED lights on the petals of the logo. The temperature can be changed by pressing and holding the power button at the top of the unit to enter the temperature selection mode, next short press the power button to cycle through the 5 settings. When 1 light is illuminated the unit is set to 182C, when two are lit the unit is at 193C, 3 is 204C and 4 is 215C. For best results we recommend vaporizing between 190C to 210C, which is between settings 2 & 3.
To wrap this unit up, I’d like to tell you guys about some of the key features of the Pax 3 that make it such a stellar unit.
The first is the Pax 3’s portability. Just like its predecessor, the Pax 2, the Pax 3 is considered one of the most portable vaporizers currently available standing a mere 3.9 inches tall and 1.2 inches wide. It will easily fit in a pocket, bag, or Zeus Armor Case for easy travel.
The second is the Pax 3’s ease of use. This unit only features 1 button and a simple 4 LED light display to indicate temperature. Couple this with an easy to pack oven and a discreet mouthpiece and it is easy to see why the Pax 3 is such a popular unit.
The third is the Pax 3 Bluetooth app; this app will allow you to easily connect your Pax 3 to your smartphone to offer you more control over your session with various heating modes and the ability to set a custom temperature. Be sure to check out the review on our blog for a more comprehensive breakdown of the app and what it offers.
The Pax 3 is an excellent unit for those looking for a super portable, top-tiered vaporizer that’s easy to use and offers efficient, satisfying vapor time after time.
I’m Kevin for TVape TV. We hope you enjoyed this video and we hope you found it useful. And for all you connoisseurs out there, keep vapin!
What’s up guys, this is Mike for TVape TV. Excellent choice getting the Pax 3! Let’s go over some quick cleaning tips to ensure you get tasty vapor with your unit, every time. First, we’ll go over the materials you’ll need, then we’ll get into cleaning and maintenance.
Before you start cleaning your PAX 3, make sure you have:
•The ZEUS Purify cleaning solution; diluted 40% with water
•ZEUS grime sticks
•the included pipe cleaners or Zeus Bristle Pipe cleaners
•the cleaning brush that comes with your Pax 3
The PAX3 is really easy to clean; all you need to do is care for the vapour path, oven screen, mouthpiece and heating chamber.
Start by removing the oven lid and mouthpiece and inserting a pipe cleaner or cleaning brush from the top of the unit to clean out any residue in the vapour path. This process will also pop out the oven screen from the bottom.
To clean the oven screen, mouthpiece, and concentrate insert, soak them in a jar of your diluted ZEUS purify solution for no more than half an hour. Make sure to remove the concentrate chamber from the attached oven lid before soaking, as you should never soak any of the oven lids, not even in water. Once the soaking is done, use your pipe cleaners to dislodge any remaining particles. Next, rinse and towel dry.
To clean the heating chamber, take a ZEUS grime stick, snap the top, let the alcohol drain to the bottom and swab the inside. To ensure no alcohol particles are left behind, after letting it sit for a few minutes, turn the unit on, set it to the highest heat setting and let it run through a couple heating cycles.
For best care, we recommend you brush out your heating chamber after each use with your PAX 3 cleaning brush. This’ll help get out any extra particles and prep your unit for your next session. And that’s it!
We hope you enjoy your PAX 3 and thanks for watching!
In the box
Add a review