Pulsar Sipper

You Should Get The Pulsar Sipper If...

You are searching for a portable Vapor Hydrator Cup that can provide silky smooth hits while being the life of any party with its very pleasant and stylish design. The Pulsar Sipper has 4 voltage settings ranging from 2.5v to 4.2v. It features a Vapor Cup that filters your vapor through water for smoother hits. However, smoother hits come with a slight downside: the water in the glass will make the bubbler get dirtier quicker, compared to Vapor Cups, by solidifying the essential oils, which will stick to it. The Pulsar Sipper is easy to clean and maintain since the heating element can be soaked in rubbing alcohol. The bubbler can be cleaned with Zeus Purify Solution. Overall, the Pulsar Sipper is a decent choice for those adamant about water filtration in conjunction with this type of Wax Vaporizer.

Travel-Friendly Hydrator Cup

The Pulsar Sipper is considered a Vapor Hydrator Cup thanks to its water-filtering abilities. It features a battery system that allows for decent portability. While we don't recommend using it on the go to the same extent as one would with a pen-style wax vaporizer, the fact that you can take it around with you is ultimately a major bonus. We recommend being extra careful with the glass pieces since it's the device's most fragile part. The atomizer of this device fits into the base via a universal 510 thread and is very similar to the heating element you will find on most Vapor Cups.

The external design and materials used are the main things to consider when comparing this device to similar ones. The Sipper is easy to use due to its touch button design. Touch buttons can sometimes be confusing when there is no LED on the actual button. In this Vapor Hhydrator Cup's case, an LED surrounds the touch button, which is quite a useful addition.

Smooth Hydrated Vapor

The Pulsar Sipper is a Vapor Hydrator Cup that differentiates itself from its competitors thanks to its ability to use water as a filter to cool down and hydrate your vapor. The bubbler has a small air hole located lower on the glass piece that should be used like a choker. This separate air hole lets the vapor escape, making it less dense than a non-hydrator Vapor Cup device like the Zenco Duo, where vapor can only escape through the top. However, it is important to note that hydrated vapor is slightly more pleasant. If you prefer smooth over strong, the Pulsar Sipper might be what you are looking for. Also take into account that with a Hydrator Cup, you would take in the whole vapor load, while with a Cup based device, you can sip it in more relaxed fashion.

Quality Build

This device's overall build quality is quite decent compared to its competitors in terms of materials and overall design. However, we should mention that the glass design is slightly too long, possibly due to the fact that there must be enough space for the water to sit in the glass piece. Ultimately this design makes the device more of a "hitter" instead of a "sipper" since the vapor does not sit in the cup for more than a few seconds. The Sipper features 4 settings to cycle from starting at 2.5v to 3.0v, 3.5v, up to 4.2v. When used at the highest setting, the Sipper can still provide decently thick vapor, just not the thickest.

Overall, the Pulsar Sipper is quite good as an overall portable Vapor Cup with a bubbler. For those who aren't hung up on getting the thickest vapor and prefer smoother vapor, this device may be just for you.